Protector Pro 2.0
£249.90*
Surcharge including VAT excl. Shipping.
£249.90*
Surcharge including VAT excl. Shipping.
Maximum safety when working in the precinct
Certified cut protection level 1
Your Protector Pro 2.0 meets the cut protection class Level 1. This means your feet are safe from chainsaw cuts at a running speed of up to 20m/s.
Shockproof thanks to Protective steel toe cap
The integrity of your feet is essential. The Protector Pro 2.0 therefore features a protective cap made of shock-resistant steel. The Protective steel toe cap is anatomically shaped and meets the highest safety requirements.
Puncture-resistant thanks to protective sole (steel)
With your Protector Pro 2.0 you can walk safely over hill and dale, because the integrated steel sole offers even safer protection against sharp objects than textile soles.
Optional: GRIP + SPIKES
Get even more out of your Protector Pro 2.0 with the optional Grip + Spikes accessory. The metal spikes for self-mounting provide optimum grip in the forest and additional hold on tree trunks.
Special comfort even on long days
Waterproof thanks to GORE-TEX®
Your feet stay dry and you stay healthy because the Protector Pro 2.0 is permanently waterproof and extremely breathable. This is ensured by the three-layer GORE-TEX® membrane throughout the lining of the Protector Pro 2.0.
Breathable with Climate System
In the Protector Pro 2.0 your foot can breathe, because a special foam system ensures that the air circulates in the shoe and moisture can escape. The Climate System works like an air conditioning system in a shoe.
Precise fit thanks to special lasts
The right shoe for your feet. Thanks to specially designed lasts, your Protector Pro 2.0 fits perfectly and provides ultimate wearing comfort, the whole day long.The hard facts
Your questions, our honest answers
The Protector Pro 2.0 has been tested according to the standard DGUV 112-191 (BGR 191) and is therefore approved for orthopaedic insoles.
This allows the Protector Pro 2.0 to be adapted even more optimally to the foot and to support its anatomical structure.
HAIX shoes are 100% Made in Europe. For us, this is not just lip service, but lived practice. When it says "Made in Europe" on a HAIX shoe, we assure you that it was made exclusively at our production sites in Mainburg and Mala Subotica, Croatia. Both plants are among the most modern shoe manufacturing facilities in the world.
By the way: "Made in Europe" is not only a promise of quality for us, but also stands for good working conditions, equal opportunities, sustainability and corporate responsibility.
At 23 cm, the Protector Pro 2.0 is cut slightly higher than the Trekker Mountain 2.0. In addition, the two models differ not only height, but also the colour and thickness of the material. The Protector Pro 2.0 is made with a slightly thinner leather of 2.5-2.7 mm, while the Trekker Mountain 2.0 is made with a leather of 2.6-2.8 mm.
In contrast to its predecessor, the Protector Pro 2.0 is equipped with an even more sturdy, comfortable and slip-resistant sole. Spikes can also be attached to these, which provide even better grip when working on slopes. For all those who do not want to compromise on safety.
The sole of the Protector Pro 2.0 provides the necessary grip so that you can carry out your activities without any impediment.
The Protector Pro 2.0 is equipped with a cut protection. This means that you can safely work with chain saws that have a running speed of 20 m per second.
Focus one hundred percent on your job thanks to complete protection of the Protector Pro 2.0.
Your Protector Pro 2.0 can be perfectly combined with the optionally available Grip + Spikes mounting set. The set consists of a two-part assembly spanner and ten small spikes. The metal spikes are screwed into the designated areas in the sole of the shoe and provide additional grip on tree trunks.
Get even more out of your Protector Pro 2.0 with the optional Grip + Spikes accessory.
You can find all the right spare parts for our shoes on our spare parts page.
We produce in a UK shoe size system. The distance between our half UK sizes is only a few millimetres. This makes it more likely to find exactly the right shoe length.
Half UK sizes differ in length by only a few millimetres.
You can simply wash the dirty shoes with water and a brush. Please do not dry the wet shoes (even if they are wet on the inside) on an open fire, a hot stove or a heater. This will change the shape of the shoe. Simply remove the footbed and stuff the shoes with newspaper or use a shoe tree. Then allow the shoes to air dry slowly. We recommend washing the footbed regularly at 30°. In general, it is best to remove the footbed from the shoes after every wear to ensure optimal re-drying.
Simply clean it with a brush and water and let it air dry.
From experience, the Protector Pro 2.0 is a normal size. We therefore recommend that you choose the usual size.
Experience has shown that the shoe fits normally.
What other customers are saying
40 Reviews
Ryan T.
Brilliant boot just very big fitting
Ordered a dive 9 as that’s my size and I have to wear 3 pars of socks and there still too big, not to mention the laces snap really easy Ordered a dive 9 as that’s my size and I have to wear 3 pars of socks and there still too big, not to mention the laces snap really easy
Lucy A.
Great Boots as always
Great boots as always, 10 + years wearing Hiax boots. Brilliant boots and service to go with them Great boots as always, 10 + years wearing Hiax boots. Brilliant boots and service to go with them
Write an evaluation
Surcharge including VAT excl. Shipping.