Fire Hero 2

£206.18
Prices incl. VAT, excl. shipping costs.
507004.3.5
507004.3.5
HAIX
The Fire Hero 2 from HAIX is a functional safety boot with an extra high shaft. The Fire Hero 2 fulfils the very highest safety standards. It is watertight, resistant against bacteria and cuts and also offers enhanced protection against chemicals. A slip-resistant, antistatic sole insulates against the cold and heat. It also complies with the fire brigade standard EN 15090:2012, Type F2A, HI3. This means that it is able to withstand temperatures as high as 250 degrees for 40 minutes without suffering any damage. HAIX’s patented shock-absorption system cushions your steps as you go. This reduces pressure on the joints and spine, even during demanding deployments. The HAIX Fire Hero 2 is reinforced by stable protectors to the front and side, whilst extra padding in the ankle area and a toe cap provide protection against impacts and falling objects. The highly breathable material used in the manufacture of the boot stops your feet from sweating. Can be put on in seconds Every second counts when you are called out on a job. It is also vital that your boots fit perfectly.  The Fire Hero 2 has a two-zone lacing system which enables you to put it on extremely rapidly. You place your foot in the boot, pull up the fastener with a single movement and secure it. You are then ready to go. The boots can be adjusted to suit your own individual requirements before you use them for the first time. The foot and calf areas can also be laced to different tightnesses. All of this means that the Fire Hero 2 is moulded to the shape of your foot and will give you a firm grip. Safety in hazardous areas Fire fighters involved in rescue missions can find themselves in extreme situations. The HAIX Fire Hero 2 has been specially designed for use in wet, icy and snowy conditions and will provide you with all the protection you need. A CROSSTECH ®  membrane with a moisture barrier offers an enhanced shield against chemicals. This guarantees that liquids such as oil, petrol, acids or blood are unable to penetrate the boot. The HAIX Fire Hero 2 is also resistant against bacteria. It fulfils the requirements of the EN ISO 17249 standard, cut protection class 2. This means that it has been tested with a chainsaw operating at a speed of up to 24 m/s.   Upper material The HAIX Fire Hero 2 is manufactured in high quality bull leather. Although the leather has been hydrophobised to render it water repellent, it still remains highly breathable. This means that your feet will stay dry. Special pigments reflect the sun’s rays to prevent any overheating. An additional toe cap at the tip of the boot makes it particularly hard wearing and durable whilst some extra external protectors guard against injury. The back of the boot also contains an area for you to enter your name. This excludes any possibility of picking up the wrong footwear, even when things need to move extremely quickly. The foot and calf areas of the boot can be laced to different tightnesses in order to provide an even better fit. A patented two-zone lacing system means that you can put on the HAIX Fire Hero 2 in no time at all. A bevelled heel at the rear means that it is equally easy to take off again. Lining, inlays, toe cap The CROSSTECH ®  membrane integrated into the interior of the HAIX Fire Hero 2 ensures that no water, blood or other body fluids can enter the boot. It also offers enhanced protection against viruses and bacteria as well as acting as a barrier to chemicals such as strong alkalis and acids. Padding in the ankle area of the boot offers protection against side impacts. A special fleece insole effectively absorbs sweat and keeps your feet dry, even when you are exerting yourself to the full. Three different insoles are available to adjust the width of the boot. These inlays are interchangeable and may also be washed if required. The HAIX Fire Eagle is shipped with the red inlay (medium) as standard. Additional Vario Fit insoles can be ordered. Sole The HAIX Fire Hero 2 has an antistatic rubber sole with a deep tread. This offers a very high degree of slip resistance and will provide you with a firm foothold on slippery terrain. The sole is puncture-resistant against sharp articles. It also features a moisture barrier and offers heat insulation properties. This means that your feet will not sweat or become too cold. An impact-absorbing PU wedge makes the Fire Hero 2 an extremely light boot and will also cushion your steps as you move along. This ensures comfort of wear for fire fighters who are out on rescue missions for several hours. Additional profiling and a dual-sided heel edge in the ankle area of the boot help to ensure a secure and firm grip when climbing ladders. The Fire Hero 2 by HAIX offers fire fighters the very highest safety standards and enables them to concentrate on their core task of saving lives. Its waterproof and bacteria-resistant qualities make it a vital partner when the alarm goes off in the fire station. Try out this champion fire brigade boot yourself now.

Fire Hero 2

(1)

Grande polyvalence et robuste. La Fire Hero 2 avec protection anti-coupure.

OutOfStock
£206.18 *
Cut protection class 2

Prices incl. VAT, excl. shipping costs.

is no longer offered Unfortunately we no longer produce this article
successor


Art.: 507004
  • Cut protection class 2 Cut protection class 2
  • Maximum protection against liquids Maximum protection against liquids
  • The standard for your safety: EN 15090 The standard for your safety: EN 15090
  • Breathable Breathable
  • Resolable Resolable
  • Made in Europe Made in Europe

Highest safety for heroes

Your FIRE HERO 2 with GORE CROSSTECH® and cut protection class 2 offers you maximum safety.

Certified cut protection level 2

Your Fire Hero 2 meets the cut protection class Level 2. This means your feet are safe from chainsaw cuts at a running speed of up to 24m/s.

The standard for your deployment

What is your field of activity? Do you work in technical assistance, fire-fighting, or maybe even with hazardous substances? The DIN EN 15090:2012 standard describes the shoes you need.

Puncture-resistant thanks to protective sole (steel)

With your Fire Hero 2 you can walk safely over hill and dale, because the integrated steel sole offers even safer protection against sharp objects than textile soles.

All-round protection thanks to Three Zone Protector System

Your foot is protected all around. Three safety protectors in your Fire Hero 2 protect you from injuries in the shin, instep and ankle area. This is ensured by the Three Zone Protector System.

Perfect comfort for all operations

The HAIX Easy Slip Out System helps you to quickly take off your FIRE HERO 2 after use.

Maximum protection from liquids

You want to get safely through any situation – no matter what happens. The CROSSTECH® membrane from Gore® in your Fire Hero 2 is not only waterproof and breathable, it also protects you reliably from blood and body fluids.

Breathable with Climate System

In the Fire Hero 2 your foot can breathe, because a special foam system ensures that the air circulates in the shoe and moisture can escape. The Climate System works like an air conditioning system in a shoe.

Easy to take off thanks to the Easy Slip Out System

You can slip out of your Fire Hero 2 in seconds, because the special heel edge in the heel area allows you to get out easily and quickly. Easy to take off thanks to the Easy Slip Out System.

Precise fit thanks to special lasts

The right shoe for your feet. Thanks to specially designed lasts, your Fire Hero 2 fits perfectly and provides ultimate wearing comfort, the whole day long.

Your shoe from every angle

The hard facts

HAIX Fire Hero 2

Article no. 507004

Puncture protection
certified for orthopedic insoles
GORE-CROSSTECH®
DIN EN ISO 15090
Resolable
Cut protection level 2
Certification:
CE 0197 EN 15090:2012 HI3 CI AN M SRC - Typ F2A
Colour:
black
Height in cm:
27,0 cm
Height:
high
Upper material:
Leather
Cut protection class:
class 2
Safety classification:
Type F2A, Type HI3 - inside & outside firefighting
Fastener:
2 zone fast lacing, fast lacing
Waterproof:
waterproof through CROSSTECH®
Weight per shoe:
1508g
Leather thickness:
2,5 - 2,7
certified for orthopedic insoles:
yes
Firefighter's boot height:
Design C

Your questions,
our honest answers

Different insoles are available for Fire Hero 2 to increase or reduce the volume in the shoe. For this purpose, we have developed a slightly thicker insole for narrow feet and a slightly thinner insole for wider feet.

Our Vario-Wide-Fit-System allows you to adjust the volume in the shoe.

The Fire Hero 2 has been tested according to the standard DGUV 112-191 (BGR 191) and is therefore approved for orthopaedic insoles.

This allows the Fire Hero 2 to be adapted even more optimally to the foot and to support its anatomical structure.

The Fire Hero 2 is suitable for anyone who needs a particularly robust fire boot. The built-in cut protection and the thick bull leather provide special protection and stability. The model is slightly heavier due to the built-in features, but no less comfortable.

The Fire Hero 2 is particularly popular for use in disaster management.

The Fire Hero 2 is the sturdiest of the four models, as it is made from thick leather. Unlike the Fire Eagle and Fire Eagle High, it features cut protection. The shaft height of the Fire Hero 2 is also slightly higher than that of the Fire Eagle and Fire Eagle Pro.

Sturdy classic with cut protection.

Thanks to Gore Crosstech, the Fire Hero 2 is not only waterproof, but also protects against the entry of blood and body fluids.

The Fire Hero 2 can be used in any work without any restriction.

You can find all the right spare parts for our shoes on our spare parts page.

We produce in a UK shoe size system. The distance between our half UK sizes is only a few millimetres. This makes it more likely to find exactly the right shoe length.

Half UK sizes differ in length by only a few millimetres.

You can simply wash the dirty shoes with water and a brush. Please do not dry the wet shoes (even if they are wet on the inside) on an open fire, a hot stove or a heater. This will change the shape of the shoe. Simply remove the footbed and stuff the shoes with newspaper or use a shoe tree. Then allow the shoes to air dry slowly. We recommend washing the footbed regularly at 30°. In general, it is best to remove the footbed from the shoes after every wear to ensure optimal re-drying.

Simply clean it with a brush and water and let it air dry.

From experience, the Fire Hero 2 is a normal size. We therefore recommend that you choose the usual size.

Experience has shown that the shoe fits normally.

HAIX shoes are 100% Made in Europe. For us, this is not just lip service, but lived practice. When it says "Made in Europe" on a HAIX shoe, we assure you that it was made exclusively at our production sites in Mainburg and Mala Subotica, Croatia. Both plants are among the most modern shoe manufacturing facilities in the world.

By the way: "Made in Europe" is not only a promise of quality for us, but also stands for good working conditions, equal opportunities, sustainability and corporate responsibility.

What other customers are saying

1 Customer reviews

5/5

Highly recommended

Just get in and feel good. I have nothing to complain about. Exactly what I expected. Super workmanship and fit. Very high quality. Very good purchase support. Answer by mail. Super !!! Fast delivery.

Rainer H.

Also available in other versions for you

5/5

Highly recommended

Just get in and feel good. I have nothing to complain about. Exactly what I expected. Super workmanship and fit. Very high quality. Very good purchase support. Answer by mail. Super !!! Fast delivery.

Rainer H.

Write an evaluation
Defective Sufficient Satisfactory Good Very Good
way too small
too small
suitable
too large
way too large

The fields marked with * are required.

Also available in other versions for you

Customers who bought this item also bought

We are
100 Percent
Made in Europe
Learn more
VERSANDKOSTENFREI MIT DEM CODE: hxship241