Fire Hero 3.0

£224.92
Prices excl. VAT, excl. shipping costs. Please note that custom duties and fees may apply and must be paid when the goods are delieverd.
507006
507006
HAIX
Upper Material Waterproof leather, hydrophobic, breathable. Cut Protection Protection against cuts certified with level 2 (24 m/sec., chainsaw speed) Inner lining CROSSTECH® Laminat Technology; 4-layer CROSSTECH® laminate, watertight and breathable. Abrasion-resistant lining with optimized climate comfort for all seasons, espec. for flexible alternating inside and outside use. Superior penetration resistance against blood and body fluids (protection against blood borne bacteria and virus). Increased chemical protection. Non-woven insole Non-woven insole absorbs moisture. Foot bed Comfortable, cushioning, moisture repellent, anti-bacterial. Separate heel shape for good cushioning and foot insertion. HAIX® Composite toe cap Anatomically formed and ultralight protective toe cap made of fi ber-reinforced plastic for highest safety requirements. Protective Throughsole Flexible protective throughsole. Sole Extremely slip resistant profiled rubber sole. Optimal performance in water. Fullfills the highest demands of the European Standards EN 15090:2012 + SRC. HAIX® HD Cap System Specially developed profi led rubber TPU cap for long lasting durability. HAIX® Climate System The HAIX Climate system uses the pumping movement, which permits air circulation with every step – warm air is released and fresh air comes in through the vent holes at the top of the boot. HAIX® Fast Lacing Fit System Two Zone Lacing System for quick and optimal lacing adjustment and correct fi t of the boot. HAIX® Vario Wide Fit System The width of the shoe can be individually adjusted by 3 different insoles. The shoe is supplied with a red insole (medium). A yellow insole (wide) and blue insole (narrow) can be ordered separately. HAIX® 3Z Protector System Safety Protection zones to prevent injury to the shin, ankle and metatarsal. HAIX® MSL System MicroSoftLight: Improved damping, extremely low weight due to the PU foam across the entire sole area, good cold/heat insulation. Sun Reflect Reduces the heating effect of the upper leather by direct sunlight. Sunlight is reflected by the leather, keeping the leather and the feet cooler. Subject

Fire Hero 3.0

(0)

The safest firefighter boot in the world – the reliable Fire Hero 3.0.

LimitedAvailabilty
£224.92 *
Maximum protection against liquids

Prices excl. VAT, excl. shipping costs. Please note that custom duties and fees may apply and must be paid when the goods are delieverd.

£224.92

Prices excl. VAT, excl. shipping costs. Please note that custom duties and fees may apply and must be paid when the goods are delieverd.

Art.: 507006
  • Maximum protection against liquids Maximum protection against liquids
  • RFID pocket RFID pocket
  • Cut protection class 2 Cut protection class 2
  • Easy Slip Out System Easy Slip Out System
  • Resolable Resolable
  • Made in Europe Made in Europe

Highest safety for heroes

Your Fire Hero 3.0 offers cut protection class 2 and will keep you totally secure on every single mission.

Maximum protection from liquids

You want to get safely through any situation – no matter what happens. The CROSSTECH® membrane from Gore® in your Fire Hero 3.0 is not only waterproof and breathable, it also protects you reliably from blood and body fluids.

Certified cut protection level 2

Your Fire Hero 3.0 meets the cut protection class Level 2. This means your feet are safe from chainsaw cuts at a running speed of up to 24m/s.

Puncture-resistant thanks to protective sole (steel)

With your Fire Hero 3.0 you can walk safely over hill and dale, because the integrated steel sole offers even safer protection against sharp objects than textile soles.

All-round protection thanks to Three Zone Protector System

Your foot is protected all around. Three safety protectors in your Fire Hero 3.0 protect you from injuries in the shin, instep and ankle area. This is ensured by the Three Zone Protector System.

Perfect comfort for all operations

A two-zone lacing system enables you to adjust your Fire Hero 3.0 in the best possible way in no time at all.

RFID pocket for optimal organisation

So you can always recognise your shoes again. Your Fire Hero 3.0 is equipped with an additional pocket that is ideal for a 30 x 30 mm RFID chip. Simply equip your shoes with your personal RFID chip and make it easy for you to manage your protective equipment.

Easy to take off thanks to the Easy Slip Out System

You can slip out of your Fire Hero 3.0 in seconds, because the special heel edge in the heel area allows you to get out easily and quickly. Easy to take off thanks to the Easy Slip Out System.

Ideal fit on your foot

With the patented two-zone lacing system, you can quickly and optimally adjust your Fire Hero 3.0 to your needs.

Precise fit thanks to special lasts

The right shoe for your feet. Thanks to specially designed lasts, your Fire Hero 3.0 fits perfectly and provides ultimate wearing comfort, the whole day long.

Your shoe from every angle

The hard facts

HAIX Fire Hero 3.0

Article no. 507006

certified for orthopedic insoles
GORE-CROSSTECH®
Resolable
Cut protection level 2
RFID-Pocket
Certification:
CE 0197 EN 15090:2012 HI3 CI AN M SRC - Typ F2A
Colour:
black/red/yellow
Height in cm:
27,0 cm
Height:
high
Upper material:
Leather
Cut protection class:
class 2
Safety classification:
Type F2A
Fastener:
2 zone fast lacing
Waterproof:
waterproof through CROSSTECH®
Weight per shoe:
1570g
Firefighter's boot height:
Design C
´

Your questions,
our honest answers

The leather of the shaft of the Fire Hero 3.0 is slightly thinner than that used in the Fire Hero 2. This makes the boot stable but still flexible. The RFID pocket included in the Fire Hero 3.0 is a further difference. We have also improved the sole of the Fire Hero 3.0. Deployments in water or in snowy and icy conditions pose no problem at all. The lacing system and instep protector have also been revised.

The Fire Hero 3.0 is your perfect companion for any type of job.

The practical RFID pocket of the Fire Hero 3.0 offers space for an RFID chip. This makes it easier for you to manage your personal protective equipment.

You can fully focus on your mission with the Fire Hero 3.0.

The Fire Hero 3.0 is equipped with a cut protection. This means that you can safely work with chain saws that have a running speed of 24 m per second.

Focus one hundred percent on your job thanks to complete protection of the Fire Hero 3.0.

Different insoles are available for Fire Hero 3.0 to increase or reduce the volume in the shoe. For this purpose, we have developed a slightly thicker insole for narrow feet and a slightly thinner insole for wider feet.

Our Vario-Wide-Fit-System allows you to adjust the volume in the shoe.

The Fire Hero 3.0 has been tested according to the standard DGUV 112-191 (BGR 191) and is therefore approved for orthopaedic insoles.

This allows the Fire Hero 3.0 to be adapted even more optimally to the foot and to support its anatomical structure.

HAIX shoes are 100% Made in Europe. For us, this is not just lip service, but lived practice. When it says "Made in Europe" on a HAIX shoe, we assure you that it was made exclusively at our production sites in Mainburg and Mala Subotica, Croatia. Both plants are among the most modern shoe manufacturing facilities in the world.

By the way: "Made in Europe" is not only a promise of quality for us, but also stands for good working conditions, equal opportunities, sustainability and corporate responsibility.

What other customers are saying

0 Customer reviews

Alle Rezensionen

Write an evaluation
Defective Sufficient Satisfactory Good Very Good
way too small
too small
suitable
too large
way too large

The fields marked with * are required.

Also available in other versions for you

Customers who bought this item also bought

We are
100 Percent
Made in Europe
Learn more